Straps For Professionals

http://trophyquestoutpost.com/

Nikon Binoculars:

http://www.nikon.com/products/sportoptics/lineup/binoculars/standard/vll_x40x50/index.htm

Gander Mtn. Binoculars Strap:

http://www.gandermountain.com/modperl/product/details.cgi?i=415341&pdesc=Gander_Mountain_Deluxe_Black_Binocular_Strap&str=binocular+strap&merchID=4005

This is a review of the Nikon Action Series 10×40 Binoculars and Gander Mtn. Binocular Strap review. Two products in one review, hope that you guys enjoy!

Duration : 0:4:35

read more »

Technorati Tags: 10x40, Action, and, binoculars, gander, mountain, mtn, Nikon, product, review, Series, strap, tqo, trophyquestoutpost, trophyquestoutpost.com

This video is intended to acquaint viewers with tips and instructions on how to paint their airsoft guns any color or pattern.

Use reliable, strong masking tape that won’t peel or come off. Use a straight edge/pin/flat-head screwdriver to work tape into small corners/grooves. Hold spray can AT LEAST 10 inches away from rifle when painting (hold it too close and paint will run and will ruin the job). Spray in well-ventilated area. Apply as many coats as you’d like, but don’t overdo it (puddles of paint will form). The color that you want to show the LEAST should be applied to the entire gun first (unless you’re painting the gun one color). Add more colors for a break-up camo (see FAMAS airsoft rifle in video). Design any stencil you’d like using just a pen and a relatively thick index card, then cut-out the stencil (leaf, tree branch, etc.) based on what you drew. Or, if you’re not the artsy type, like myself, use a fake leaf or fake tree branch, as long as they are NOT flimsy or porous.

Be creative and have fun!

Airsoft guns shown in video:
Smith and Wesson M4505 Spring Airsoft Pistol (originally black color)
Heckler and Koch G36 C AEG Airsoft Rifle (originally black color)
Foreign Legion’s FAMAS F1 AEG Airsoft Rifle (originally clear-black color)

Spray Paints used:
Krylon Khaki Gloss (H&K G36 C Rifle)
Krylon Mateallic Gold (S&W M4505 Pistol)
Krylon White Gloss (FAMAS F1 AEG)
Krylon Black Gloss (FAMAS F1 AEG)
Krylon Gray Gloss (FAMAS F1 AEG)

PLEASE, comment & ask any questions…

Duration : 0:10:57

read more »

Technorati Tags: AEG, air, AIRSOFT, call, Camo, detail, draw, drawing, duty, F1, FAMAS, G36, gun, GUNS, H&K, how, instruction, job, M4505, metallic, nerf, Of, paint, PAINTBALL, Painting, pistol, review, rifle, S&W, Soft, spray, to

The MOPC is a fully adjustable vest that carries your hard or soft armor plates for ballistic protection of vital on missions where full-sized armor is too bulky! Front and back padded pouches secure your ceramic or other protective body armor plates.
My Video’s of the MOPC in Action:
1.) http://www.youtube.com/watch?v=OWYi28THu4o
2.) http://www.youtube.com/watch?v=HKCJ-_hAn3s
3.) http://www.youtube.com/watch?v=CBMZ0CUSOBI
4.) http://www.youtube.com/watch?v=qTohDX-arH4
5.) http://www.youtube.com/watch?v=YX0cNEKaxBI

The MOPC does not include the armored plates, but will hold front and rear plates up to 10″ x 13″, and side panel plates up to 6″ x 8″.

The Modular Operator Plate Carrier is constructed with licensed Crye Precision 1000 Denier Multicam Cordura Fabric. The front and rear panels of the carrier has 6 rows by 6 columns of PALS webbing for mounting any MOLLE compatible pouch, holster or accessory and are lightly padded covered with mesh material for comfort and airflow.

The front panel features loop material for ID patches, nametapes, or morale patches, and the 11″ x 7″ front map pocket is secured by hook and loop backed up by a snap.

The back panel has a heavy duty drag handle and the heavy duty shoulder straps have detachable pads, hook and loop adjustments and side release buckles.

The detachable external cummerbund is adjustable and features heavy duty elastic for comfort and pockets for up to 6″ x 8″ side armor panels or plates. The cummerbund has an additional 3 rows by 10 columns of PALS webbing per side.

The MPOC has an internal adjustable waist strap with side release buckles. Fits sizes Medium to XL.

MultiCam was developed by Crye Precision as a universal camouflage that is able to adapt to a wide variety of environments. The reflective nature of the pattern causes it to change apparent color depending on the surrounding environment. Special fabrics and coatings help it to blend in under various lighting conditions across both the visible and IR spectrums. The infrared spectrum camouflage makes this pattern effective even when viewed with night vision equipment.

Referred to as OEF Camouflage (Operation Enduring Freedom Camouflage), the MultiCam pattern has become adopted by the US Army and other NATO forces participating in the ongoing military campaign in Afghanistan. Because it was developed for the US military, all MultiCam products are made in the USA. All clothing and uniform components utilizing the MultiCam pattern are fire resistant and use no melt, no drip Cordura fabric.

http://www.youtube.com/user/MrSKSkill

Condor Outdoor Products, Inc.
CTD’s Link for MOPC:

http://www.cheaperthandirt.com/Molle865-1.html

Nutnfancy TNP:

http://www.youtube.com/user/nutnfancy

http://www.youtube.com/user/sootch00

Duration : 0:16:45

read more »

Technorati Tags: afghanistan, AK-47, America, ar-15, blackwater, Carrier, chris costa, duty gear, firearms, fpsrussia, gear review, gen4, Glock 22, gun saftey, GUNS, magazine, magpul, MILITARY, militia, modgear, Modular, mosin nagant, mrlockandload, MrSKSkill, multicam, nutnfancy, OPERATOR, patrol gear, plate, pmag, pride, review, ruger 10/22, run and gun, tactical guns, tactical outdoor gear, travis haley, triple canopy, weapon review

http://www.etrailer.com/tv-demo_erikson_ratchet_straps_E01331.aspx

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
This is a 1″ x 10′, 900 pound rated retractable ratchet strap from Erikson manufacturing. This is a really nice device whose claim to fame is that with conventional ratchet straps you have a length of strap left over when you’re done tying it down. Most of the time you take the excess and shove it down or tie it up somewhere. This product alleviates all that with its self storage system. As you can see it comes with two conventional hooks, the ratchet itself and the wind up mechanism. We’re going to show you by tying this box down the typical application. Basically you take your one hook and attach it to your tying point. Then take the rest of your strap and pull it to the other side. Make sure that neither of these are twisted as it puts additional stress on the straps that you don’t need. At this point you take your lever here, push it back and it ratchets it down tight. At that point your load is secured and won’t go anywhere. There you have it for part # E01331, the retractable Ratchet Strap from Erikson manufacturing.

Duration : 0:1:12

read more »

Technorati Tags: demonstration, erikson, etrailer.com, instructions, ratchet, Retractable, review, strap, trailer

http://www.etrailer.com/tv-demo_erikson_ratchet_strap_01324.aspx

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
This is a 1-1/2 inch x 15 ft. long 4,000 pound Ratchet Strap assembly with the twisted snap hooks. This device is intended for anybody carrying a heavy cargo load on their trailer or flat bed pickup truck. Again this is good for 4000 pounds, so you could use this for the heavy tool box, lumber or what not. This is approaching industrial duty materials. Again if you’re not approaching that kind of weight, the 15 ft. length will help out in just about any tie down situation, even for a weekend warrior. What we have here is a nice heavy duty ratchet assembly. As you can see you pull this button back and it releases forward. To ratchet it down you simply push down. As you can see here this center portion of the axle, the strap will go here. To operate it you pull the strap through, take up your slack and then you ratchet everything tight. We’ll demonstrate its use on a typical application.
We have our assembly here, we’ll just go ahead and tie down this box. We’ll start with the ratchet end on the left hand side then we’ll move on to the right hand side. At this point we can thread our strap through the center axle, and pull our slack through. Pull all of your excess through, this you’ll have to tie up in your own fashion. Now you hold everything in place and ratchet it together. You pull it flat and there you have it, your cargo is properly secured. Also you’ll notice the hooks are shaped differently from the others. The normal flat hook would be parallel with this strap here. What would happen is if the hook were that way you would get a twisting with the strap which would give extra tension on the strap. With this twisted hook it allows the strap to stay flat on the load, less wear and tear and more distribution of the forces. There you have it for part # 01324 the 1-12 inch x 15 ft. ratchet straps with twisted hooks from Erikson manufacturing.

Duration : 0:2:19

read more »

Technorati Tags: demonstration, erikson, etrailer.com, hook, instructions, latch, ratchet, review, safety, snap, strap, trailer, twisted

Alright guys here are the first pieces in building my chest rig. I ordered two single pistol pouches from UScav.com. From what I can see these things are very well made and will work just fine for anyone out there. If you guys are wondering Condors Multicam pattern looks great. If you guys are curious the condor brand is called Modgear on CheaperThanDirt.com. So if the price is cheaper there feel free to purchase it worry free because they are Condor brand products. Everything else I touch on in the video. Thanks for watching guys, please rate and subscribe.

Duration : 0:5:26

read more »

Technorati Tags: ACU, and, ar15, ARMY, attach, black, cammo, Camo, camouflage, condor, coyote, dark, desert, Digital, earth, Flat, Green, headquarters, how, HQ, install, M&P, m16, m4, magazine, magazines, MILITARY, modgear, molle, multi-cam, multicam, Musty, od, pistol, POLICE, pouch, review, S&W, single, smith, spingfield, strap, table, tactical, tan, to, top, webbing, Wesson, xd, xd9, xdm, Yeti

http://www.etrailer.com/tv-review-erickson-ratchet-straps-EM69627.aspx

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Today we are going to review part number EM69627 from Erickson. This is their 2 inch by 27 foot long Ratchet Strap. It is rated up to 10,000 pounds with the strap wrapper. What the strap wrapper does is it lets you stow the extra strap that is always left over whether it be a little bit or a lot in some cases you do not have it flying in the wind or you do not have to tie it in a knot somewhere. 00:21

The handle itself is upgraded with a molded rubber covering over it. It is easy to grip so your hands do not slip. Even the hooks themselves are covered in a plastic material that keeps them protected for a very long time. 00:31

It is very simple device how it works. Basically the strap goes through the center of it. This part right here and just pull it tight as far as you can until you take up all of the slack. Now we have pulled the tension as tight as possible by hand and of course you are going to have a little bit of slack in here but that is fine. And then what you want to do is release it they all have a little release on the inside here. And then you can go ahead and simply ratchet it and it tightens down to get it as tight as you want. 01:07

Now let us go ahead and demonstrate this on a typical application. Give you a better idea on how it works. Alright we will go ahead and demonstrate the strap here on a typical load. We will take our hooks and attach them to the tie down points on the truck. And we will put our ratchet end on the tie down hook. Now we will take our strap long end and go through the ratchet, stay on the same side as the loop with the strap wrapper. Pull it on through. And go ahead and ratchet it tight. Then we will take our excess here, wrap it up in a nice loop, and then we will use our strap wrapper to hold it in place. And it is ready to go. All right, with that that finishes our review of part number EM69627 from Erickson.

Duration : 0:2:12

read more »

Technorati Tags: cargo straps, cargo tie downs, EM69627, erickson, etrailer.com, ratchet, ratchet strap, review, strap wrapper, straps, tie downs

Buy @ http://www.amazon.com/dp/B002CF3RHE/?tag=chittiv3-20
Technical Details:Tree Saver Strap with loop ends 3″ x 10′ – 30,000lb Capacity * Highest Quality Manufacturing * Sewn Eye Loop * Eases Winching Activity * Saves the enviroment – Saves the Tree from Damage

Duration : 0:0:21

read more »

Technorati Tags: 10, Demo, discount, review, Saver, strap, Tree, unboxing, winch

Buy @ http://www.amazon.com/dp/B002K8P2QW/?tag=chittiv3-20
Technical Details:Extra wide steel core hooks * Solid molded design with cord length indicator * Wide flat strap design * 36-Inch size * Recommended maximum stretch of 54-Inch

Duration : 0:0:21

read more »

Technorati Tags: 36, 95732, Ancra, Bungee, Camo, camouflage, Cords, Demo, discount, Flat, Inch, Pack, review, strap, unboxing

Buy @ http://www.amazon.com/dp/B000COBXPA/?tag=chittiv3-20
Technical Details:6′ x 2″ w/ Loop Ends 20,000 lbs – Winch Strap The best way to tow a stuck vehicle or disabled car or truck. * Available with hook ends or loop ends. The hook ends are zinc plated, forged hooks are specially designed for towing and attach easily to vehicle frame. * Keeper Vehicle Recovery Straps & Emergency Tow Straps are available in a large variety of widths, lengths and rating capacity. The rated capacity for these straps range from 7,000lbs to 60,000lbs. * Lighter than chain and won’t rust, rot or mildew. Stores easily in trunk, job box or behind pickup truck seat. Winch Straps are also available designed to attach a 12 volt winch cable to a tree * Hi Test Webbing. Keeper designs products with webbing that exceeds the demands of eachá specific application.á Keeper introduced Hi-Test webbing to the tie-down market many years ago, using three layers of high tenacity yarn. The face, back and edge layers protect the webbing from abrasion and weather. The center, or warp yarns, provide the strength.á All webbing meets appropriate abrasion capacity requirements so you are assured of longer lasting products

Duration : 0:0:21

read more »

Technorati Tags: 000, 20, 2952, Capacity, Demo, discount, Keeper, lbs., Max, review, strap, unboxing, Vehicle, web, winch, Wt.