Describes how to use the Hi-Lift Jack as a mechanical winch. Many vehicles don’t have an electric winch, or may need to pull a vehicle in a direction not possible with an electric winch. The Hi-Lift Jack is an inexpensive option for providing winching capabilities.
Duration : 0:2:25
The Mazda Genuine Recovery kit demonstrates the items required to successfully recover your All-New BT-50 in the event of becoming bogged, stuck or immobile.
Duration : 0:2:34
You can load up the All-New BT-50 with a range of accessories both inside and out. Here’s a clip that features some of the exterior ones like the snorkel, recovery kit and air compressor.
Duration : 0:5:45
http://superwinchterrafourfive.issuperhot.com/
http://www.etrailer.com/tv-demo-superwinch-09034.aspxVideos are provided as a guide only. Refer to manufacturerinstallation instructions and specs for complete information.Today we are going to cover part number 09034 from Superwinch. This is their EPi 9.0 High-Performance Recovery Winch. This winch is rated at 9,000 pounds. It features power load in and out. It also incorporates the freespooling clutch that allows you to pull up the cable by hand when you need to, so you do not have to wait on a slow motor to pull it out. This also has a quiet and efficient, full metal, three-stage planetary gear box. The motor is a 4.6 horsepower series wound motor. It comes complete with a roller fairhead, that you see in the front there, that reduces the wear and strain on the wire rope while you are doing winching applications. It also comes with a hand-held remote so that you can stand back, safely out of the way, to operate the winch and get your vehicle out of its stuck position. It also has an automatic load-holding brake. And it also includes a pulley block to give you double capacity on your cable. We will go ahead and point out some of these features on the winch itself.We will cover some of the accessories in detail here. First off, this is your Winch Strap right here. And this will go on the end of your hook so you do not have to really handle that part while you are holding the cable out. You might get some sharp edges or something in there. That just slips onto the hook. This is the pulley that splits apart. Put your cable inside there, and then you put your hook against the object that you are going to be pulling against. And effectively, that doubles your cables capacity. Next we have the remote that plugs into the winch so you can stand safely away while you are doing your winching application. And this remote plugs in right here. To control the winch, you have this thumb knob right here. You push the button up to go out and then the opposite to pull back in. It is kind of slow. You can actually put it in the free spool mode by pulling this handle up and turning it. And then to pull it back in, of course, re-engage the clutch and winch back in. And one other thing I want to show you is the roller fairhead that comes with the winch. And these rollers here protect the cable while you are pulling it in or out. And there is a roller on the top, there is a roller on the bottom, and there is one on each side. So if you are at an odd angle when you are winching against something, your cable still is protected because it has a nice surface to roll against.We are going to demonstrate this product. We are going to tie our FJ off to a tree here and we are just going to pull it across the slope just to give you a general idea of how this will work. We are using a tree saver strap and we are going to run the strap through our pulley block. That way we will run the cable back to the FJ so we can double our line capacity. We are going to go ahead and run our switch forward and we will activate the winch. As you can see, it is pulling the vehicle across the slope. All right, there you have it for part number 09034, the EPi 9 winch from Superwinch.
Duration : 0:3:2
Out for a plesant Saturday, got really suck, Drove around a snatch strap so not to roll down a hill
Duration : 0:3:43
The WYSE Model A2000 Mid-Span Winch System comes complete in a heavy-duty carrying kit with everything you need to keep going.
The kit includes:
* A2000 winch platform with winch
* Hand controller with 8 gauge wiring
* “Pigtail” power connector for battery box
* 4ft heavy-duty choker strap
* 6ft heavy-duty choker strap
* 1 ton shackle
* Clear, easy-to-follow instruction manual
Duration : 0:0:57
John Rich shows us how to use kinetic tow straps for recovering stuck off-road vehicles. John is from Stoney Ridge Acedemy in South Africa
Duration : 0:8:38
X-Pack recovery kits offer all the required accessories for your vehicle recovery situations, both snatch and winch recoveries. Bow shackles, snatch strap, winch extension straps, tree trunk protectors, snatch block, gloves all in a sturdy carry bag. All Bushranger recovery gear is tested to Australian Standards
Duration : 0:1:47
Putting a Warn 8274 on my 1977 K10 part 1. Gonna redo the hacked brackets which were on a 1979 ford 1 ton. The warn bumper was originally for a chevy and modded for a ford and now it goes back to chevy. Plate and gussets to come. All grade 8 bolts will be used.
Duration : 0:5:56
Packing The extreme off-road wrecker for the Dresser off-road rally the wrecker has a lot of equipment to carry
Duration : 0:5:30